anonymous
  • anonymous
anyone knows how to design an electronic dice with LED. Please help me
Design
  • Stacey Warren - Expert brainly.com
Hey! We 've verified this expert answer for you, click below to unlock the details :)
SOLVED
At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi, id est laborum et dolorum fuga. Et harum quidem rerum facilis est et expedita distinctio. Nam libero tempore, cum soluta nobis est eligendi optio cumque nihil impedit quo minus id quod maxime placeat facere possimus, omnis voluptas assumenda est, omnis dolor repellendus. Itaque earum rerum hic tenetur a sapiente delectus, ut aut reiciendis voluptatibus maiores alias consequatur aut perferendis doloribus asperiores repellat.
jamiebookeater
  • jamiebookeater
I got my questions answered at brainly.com in under 10 minutes. Go to brainly.com now for free help!
thomaster
  • thomaster
Do you have an Arduino Uno? You could create a led dice with that. http://www.funnyimagination.com/Arduino/dice_circuit.jpg
thomaster
  • thomaster
Also I got a few printed circuit boards for electronic dices. I could take some pictures, maybe you'll understand how it works.
thomaster
  • thomaster
Components needed: 7x Light-emitting diode (LED) 3x 560 Ohms resistor (green, blue, brown, gold) 2x 100,000 Ohms resistor (100 KiloOhms) resistor (brown, black, yellow, gold) 1x BYV 38V vishay fast diode 1x Texas Instruments CD4029BE IC (Integrated circuit) (this is a binary counter IC) 1x Philips HEF40106BP IC (Hex inverting Schmitt trigger) 1x capacitor \(\underline{\sf 103}\)

Looking for something else?

Not the answer you are looking for? Search for more explanations.

More answers

anonymous
  • anonymous
thanks a lot,two more questions, what do you use to put all your components in the circuits, and what kind of a component is used as a switch and how do you put it?
thomaster
  • thomaster
By soldering it on the printed circuit board of course :) I didn't use the actual switch in the one on the photo (I just connected the 2 holes in the board with a wire do it will turn on when the battery is connected) In another one I used some plastic switch from another device (you could use anything, like 2 wires and connect them to switch it on. The 2 metal plates on the circuit board are there to roll the dice again, you'd have to press it with a finger to close the circuit and a new number will be randomly chosen. You could use a universal circuit board for this dice and connect everything with insulated wires (to prevent shortcircuit). Just look at the lines on the pictures to see how everything should be connected. Also it's important to have the correct IC's

Looking for something else?

Not the answer you are looking for? Search for more explanations.